Methods to train dogs to bite

1. Choose an experienced trainer, hide it after being appropriately disguised, and the owner will tie the dog to the assistant trainer. The owner stands next to the dog in a sheltered area some distance away. The assistant trainer holds a stick in his right hand and wears a protective sleeve in his left hand. He emerges from a hiding place and makes various violent movements from far to near. He hits the ground with a whip or stick, sometimes attacks and retreats, and tries every possible means to tease the dog and make it bark wildly. The dog owner encourages the dog to pounce on the assistant trainer and rewards it with the "good" command. After the dog's ferocity is aroused, the assistant trainer can walk up to the dog, and when the dog opens its mouth, hand over the protective sleeve to the dog and let the dog bite; when the dog bites and persists, the assistant trainer can take off the protective sleeve. And continue to tease the dog with a stick to make the dog hostile to the assistant trainer; at this time, the assistant trainer should retreat to the hiding place while teasing. After several times of this type of training, when the dog can successfully complete the training subjects, it can move to the next step and training.

2. Select a training location in advance and hide the assistant at the training location. When the dog owner takes the dog to the training ground and lets the dog sit in a hidden position, the dog owner squats half-squat and gives the dog an "attention" command, and the assistant immediately makes a sound to remind the dog; after a short pause, the dog comes out of hiding appear somewhere. Use a stick or a branch to continuously hit the ground, make sneaky movements, etc. When the dog's ferocity reaches the level of attacking the assistant coach, the dog owner should issue an "attack" command to let the dog bite. ; At this point, the assistant should be afraid of being knocked back. The final escape failed. The dog owner encourages the dog by constantly issuing "attack" and "good" commands, and then ends the training.

3. After repeated training with the above method, if the dog develops the courage to attack and bite the assistant trainer and keeps biting, the dog should be trained to "let go". The basic method is that after the dog owner makes the dog bite the assistant's sleeve, the assistant resists for a while, then lowers his arm so that the sleeve is close to the ground and remains motionless. At this time, the dog owner lowers the " "Release" command and pull the leash back slightly. Some dogs will let go as long as they hear the command "let go" from the owner, but some dogs will not let go under such circumstances. The trainer should repeat the command, pull the traction rope backwards, and cut the dog's body with his left hand. Pinch the bridge of the nose or pinch the dog's thigh, forcing the dog to let go. When the dog develops preliminary conditioned reflexes, the training distance is gradually increased to the point where the dog can be commanded to "release" from a longer distance.

4. After the above training is completed, you can start training the dog's ability to monitor the bitten object. The method is that the dog owner uses a long leash to control the dog. When the dog bites the assistant, the owner tells the dog to let go. The assistant stops teasing and raises his hands to surrender. The dog owner orders the dog to monitor the assistant. If the dog looks around or attempts to return to the owner, the assistant trainer should immediately escape or fight, redirect the dog to attack the assistant trainer; when the dog bites the assistant trainer, the assistant trainer should immediately stop fighting, and the dog owner Let the dog watch again. After repeated training in this way for many times, the dog will be able to develop the ability to monitor and attack and bite the opponent.Monitoring was carried out.

Precautions for dog bite training

1. Before training the dog, you must slowly develop its alertness, which is Orientation reflex is formed in response to external stimuli, followed by hostility. Then during the training process, you should find a quiet and spacious place to eliminate external interference to the dog to prevent it from affecting the dog's training.

2. When training a dog to bite, safety protection must be done in advance. At the same time, necessary auxiliary training items should also be prepared, such as traction ropes, towels, worn foreign objects, wooden sticks, biting objects, etc. If you are training your dog to bite people, you must be safe and wear protective sleeves.

3. During the training process, try to tease the dog so that it can give the bite command when it is in an excited state. At the same time, to stimulate the dog's natural desire to hunt, you can use food to lure and stimulate the dog to show a strong desire to obtain, and then give the command to bite, loosen the dog's leash, and let it pounce. Target.

4. In the process of training your dog to bite, you must also exercise reasonable control. In this process, the dog’s loyalty and obedience training must also be strengthened. We should let the dog develop the habit of biting only after the owner gives the order. Do not let the dog develop the habit of biting casually.